XW6T
1
0
Equivalent Labels from Other Companies and
Recommended Label Printers
Use the following label printer.
The following table gives the manufacturer’s model number as of
August 2019.
*
When using a printing tool, use a Phoenix Contact label printer.
Note:
Ask the label manufacturer or printer manufacturer for details.
5. Mounting to DIN Track/Removing from
DIN Track
Mounting Method
• To mount a Terminal Block to a DIN Track, press it against the DIN
Track as shown in the following figure.
* Even when Terminal Block seems like tilting before mounting it
on the DIN Track, it is no problem for the functions.
• After mounting, push Short Bar securely and check it for no gap or
no tilting.
Removal Method
To remove a Terminal Block from the DIN Track, insert the tip of a flat-
blade screwdriver in the groove on the Short Bar, remove the Short
Bar so that lifting it up from the Terminal Block (1), operate the
screwdriver so that it catches the hook (2), and then remove the
Terminal Block with the divided state (3). However, do not apply
excessive force to the Terminal Block. Doing so may damage it.
Replacing Method
(1) Mount the Terminal Block with divided state on the DIN Track.
(2) Insert Short Bars into the insertion holes for Short Bars.
(3) Insert Short Bars for securely.
Adding Method of Common Terminal Blocks
(1) Remove the End Cover.
(2) Mount a Common Terminal Block (for addition) on the DIN Track.
(3) Replace the End Cover.
(4) Mount a Short Bar so that it overlaps with the existing Short Bar.
Manufacturer
Omron
Phoenix
Contact
Weidmuller
Cembre
Label
XW5Z-P1.5LB1
UCT-TM3,5
NA
MG-CPM-04
41392
XW5Z-P2.5LB1
UCT-TM5
MF 8/5
MG-CPM-04
41390N
MF 10/5
MF 12/5
XW5Z-P1.5LB2
UCT-TMF3,5
---
---
XW5Z-P2.5LB2
UCT-TMF5
---
---
Label printer
---
*
BLUEMARK
CLED,
THERMOMA
RK CARD
SET PLUS,
THERMOMA
RK CARD
PrintJet
ADVCANCED,
Plotter MCP
Plus,
Plotter MCP
Basic
Markingenius
MG3
(2)
(3)
(1)
Overlapping Short Bars enables to add
the number of Common Terminal Blocks.
