background image

8 - 27

8   Browser Interface

UHF RFID System V780-series Reader/Writer User’s Manual (Z389)

8-2
  Op

eratio

n In

terface

8

8-2
-8  Logs

Click the 

Log view

 Button, and then click the 

System error log

 Tab.

The System Error Log Tab Page will be displayed. You can check the system error information that was 
detected by the Reader/Writer. If you select one of the records in the list, details for the record will be 
displayed.

For details on the system error log, refer to 

9-2-1 Command Errors

 on page 9-4.

System Error Log

Item name

Description

Remarks

No.

Displays the log record number.
The lower numbers are assigned to the most recent records.

Time

Displays the time when the system error was detected by the 
Reader/Writer.

Level

Displays the level of the system error as follows:
Minor fault or Major fault

Error name

Displays the error code and error name.

For details, refer to 

9-3 Errors and 
Countermeasures

 

on page 9-8.

Additional info 1

Display codes that provide supplemental error information.

Additional info 2

List

Details

Click this button to refresh 
the display.

Click this button to 
delete log information.

Содержание V780 Series















































































































































































































































































































































































































Отзывы: