Omron V780-HMD68-EIP-JP, Руководство пользователя

Страница: 202 / 326

7 Ethernet/IP Communications
7 - 50 UHF RFID System V780-series Reader/Writer User’s Manual (EtherNet/IP
TM
) (Z402)
z Function
This command sets the RF Tag selection filter conditions for the Reader/Writer.
z Command Area
z Response Area
SET RF TAG SELECTION FILTER CONDITIONS
Signal/data Data type Size Function
CmdCode/Command Code WORD 2 bytes 300B hex
CmdParam1/Command Parameter 1 WORD 2 bytes 0000 hex (Not used.)
CmdParam2/Command Parameter 2 WORD 2 bytes 0000 hex (Not used.)
Reserved/Reserved Area WORD 2 bytes 0000 hex (Not used.)
Cnt Response/Update Counter
Response WORD 2 bytes 0000 hex (At command execution)
The value is counted up due to a change in
the update counter.
For details, refer to
Update Counter/Update
Counter Response on page 7-10.
CmdData/Command Data
RF Tag selec-
tion
filter conditions Enable/dis-
able WORD 2 bytes Specifies whether to enable or disable RF Tag
selection filter conditions.
0000 hex: Disable
0001 hex: Enable
Default setting: 0000 hex
Address
*1
*1. If the RF Tag selection filter conditions settings are disabled, this value is always 0000 hex.
WORD 2 bytes Specifies the address (in words) of the RF Tag to check.
1000 to 17FF hex: UII (EPC) area
*2
2000 to 27FF hex: TID area
3000 to 3FFF hex: User area
* You cannot specify 0000 to 07FF hex
(reserved area).
Default setting: 0000 hex
*2. Address 1000 hex specifies the "UII (EPC)_CRC-16" area of the RF Tag. Since this area varies depending on
the EPC code, care must be taken during use.
Data
length
*1
WORD 2 bytes Specifies the number of words of data to check.
Setting range: 0000 to 0010 hex
Default setting: 0000 hex
Data
*1
ARRAY[]
OF WORD 16 words
(32 bytes) Specifies the data to check. (16 words)
* Fill unused data with 0000 hex.
* In compliance with Gen2 standards, bits 0
to 255 are masked, so the last bit of word
16 (bit 256) is ignored.
Default setting: 00..00 hex
Signal/data Data type Size Function
ErrCode/Command Code WORD 2 bytes Error code
RespInfo1/Response Information 1 WORD 2 bytes 0000 hex (Not used.)
RespInfo2/Response Information 2 WORD 2 bytes 0000 hex (Not used.)
RespInfo3/Response Information 3 WORD 2 bytes 0000 hex (Not used.)
Cnt/Update Counter WORD 2 bytes 0000 to FFFF hex
The value is counted up due to a change in
the response area.
For details, refer to
Update Counter/Update
Counter Response on page 7-10.