Omron V780-HMD68-EIP-JP, Руководство пользователя

Страница: 180 / 326

7 Ethernet/IP Communications
7 - 28 UHF RFID System V780-series Reader/Writer User’s Manual (EtherNet/IP
TM
) (Z402)
z Function
This command restarts the entire Reader/Writer.
z Command Area
z Response Area
RESET
Signal/data Data type Size Function
CmdCode/Command Code WORD 2 bytes 1002 hex
CmdParam1/Command Parameter 1 WORD 2 bytes Options
0000 hex: Reboot (Normal start)
0001 hex: Reboot (Safe Mode start)
FFFE hex: Forced reset (SAFE Mode start)
FFFF hex: Forced reset (Normal start)
Reboot: Reset is performed after the
Reader/Writer is set to an idle state.
Forced reset: Reset is performed immediately
when the command is received, without waiting
for the Reader/Writer to be set to an idle state.
CmdParam2/Command Parameter 2 WORD 2 bytes 0000 hex (Not used.)
Reserved/Reserved Area WORD 2 bytes 0000 hex (Not used.)
Cnt Response/Update Counter
Response WORD 2 bytes 0000 hex (At command execution)
The value is counted up due to a change in
the update counter.
For details, refer to
Update Counter/Update
Counter Response on page 7-10.
Signal/data Data type Size Function
ErrCode/Command Code WORD 2 bytes Error code
RespInfo1/Response Information 1 WORD 2 bytes 0000 hex (Not used.)
RespInfo2/Response Information 2 WORD 2 bytes 0000 hex (Not used.)
RespInfo3/Response Information 3 WORD 2 bytes 0000 hex (Not used.)
Cnt/Update Counter WORD 2 bytes 0000 to FFFF hex
The value is counted up due to a change in
the response area.
For details, refer to
Update Counter/Update
Counter Response on page 7-10.
Note In the case of a forced reset, restart is performed without any output in the response area. During a
reboot, an output is performed in the response area.