Omron V400-R2 Series Скачать руководство пользователя страница 5

Страница: 5 / 71

2. Terms and Definitions

2. Terms

and

Definitions

Term

Explanation and Definition

Protocol macro

A protocol macro is a function that stores a data send/receive procedure

(protocols) in a Serial Communications Board or Serial Communications

Unit to exchange data with general-purpose external devices by

executing the ExecPMCR instruction on the CPU Unit.

Protocol

A unit of independent communication processing with a specific

general-purpose device. A protocol includes a data send/receive

procedure. A protocol consists of multiple sequences.

Sequence

A unit of the independent communication processing which can be

started by executing the ExecPMCR instruction of a program. A

sequence that is started will execute steps registered in its own

sequence.

Step

A unit to execute any one of the followings: message send processing,

message receive processing, message send/receive processing, clear

receive buffer, or step wait. Up to 15 steps can be set per sequence.

Send message

A communication frame (command) sent to the external general-purpose

device. A send message is read from the step in the sequence, and sent

to the external general-purpose device.

Receive message

A communication frame (response) sent from the external

general-purpose device. A receive message is read from the step in the

sequence and is compared with data received from the general-purpose

external device.

Matrix

A matrix is used when a general-purpose external device sends multiple

types of communications frames (responses). More than one

communication frame can be registered in one matrix.

Case

A unit to register multiple communication frames (response) to a matrix.

One communication frame is registered as one case. Up to 15 types of

cases can be registered per matrix.

(AT specification)

This attribute allows the user to specify an address assigned to a

variable. An I/O port or an address in memory used for CJ-series Units

can be specified.

Содержание V400-R2 Series








































































Результаты поиска

Содержание V400-R2 Series

Отзывы:

Бренды по названию

Популярные бренды

Omron V400-R2 Series, Руководство по подключению

Результаты поиска

Содержание V400-R2 Series

Отзывы:

Бренды по названию

Популярные бренды