![background image](http://html.mh-extra.com/html/omron/sysmac-ny-series/sysmac-ny-series_hardware-user-manual_742441149.webp)
Power Connector Wiring Procedure
Use the following procedure to wire the power connector.
1
Ensure the power connector is not connected to the Box PC.
2
Remove the sheath from the power supply wires.
7 mm
Precautions for Safe Use
Observe the following precautions to prevent broken wires.
• When you remove the sheath, be careful not to damage the conductor.
• Connect the conductor without twisting the wires.
• Do not weld the conductors. Doing so may cause the wires to break with vibration.
3
Insert a screwdriver in the small opening above the cable opening
1
to unlock the cable entry
and then push the wire all the way to the back of the cable opening
2
.
2
1
1
2
Pin
Description
1
24 VDC
2
0 VDC
4
Remove the screwdriver.
Do not apply stress to the cable after you have connected the wires.
5 Installation
5-35
NY-series Industrial Box PC Hardware User's Manual (W553)
5-4
W
ire
5
5-4-3
Wire the Power Connector
Содержание SYSMAC NY Series
