Omron SYSMAC C200H-TC, Руководство по эксплуатации

Страница: 51 / 85

42
Parameter Default value Write/Read
data range
Actual data
range
Bank
no.
Loop
no.
Read Write Com-
mand
Alarm SV 1 (see note 4) 0 3 Yes Yes Yes Yes
Alarm mode
TC 1, 4, 5:
0
°
to 9999
°
C
Other TCs:
–999
°
to
9999
°
C
0000 to
9999
F999 to
9999
0
°
C
Alarm SV 2 (see note 4) 0 4 Yes Yes Yes Yes
9999 C
Pt 1, 4, 5:
0.0
°
to
999.9
°
C
Other Pts:
–99.9
°
to
999.9
°
C
0000 to
9999
F999 to
9999
0
°
C
Input shift value 0 5 Yes Yes Yes Yes –99.9
°
to
999.9
°
C
F999 to
9999 0.0
°
C
Proportional band (see
note 1) 0 6 Yes Yes Yes Yes 0.0
°
to
999.9
°
C
0000 to
9999 40.0
°
C
Integral (reset) time
(see note 1) 0 7 Yes Yes Yes Yes 0 to 9999 s 240 s
Derivative (rate) time
(see note 1) 0 8 Yes Yes Yes Yes 0 to 9999 s 40 s
SP lower limit 1 0 Yes Yes Yes No Sensor measuring range
lower limit to (SP upper limit
value – 1 digit) TC: –200
°
C
Pt: –99.9
°
C
SP upper limit 1 1 Yes Yes Yes No (SP lower limit + 1 digit) to
sensor measuring range up-
per limit TC: 1,300
°
C
Pt: 450.0
°
C
Control period (see note
1 and 3) 1 7 Yes Yes Yes No 1 to 99 s 20 s
Hysteresis (see note 2) 1 8 Yes Yes Yes Yes 0.0
°
to
999.9
°
C
0000 to
9999 0.8
°
C
Alarm hysteresis (see
note 4) 1 9 Yes Yes Yes No 0.0
°
to
999.9
°
C
0000 to
9999 0.2
°
C
Heater current monitor
(see note 3) 1 A No Yes Yes No 0.0 to 5.6 A 0000 to
0056 ---
Heater burnout current
(see note 3) 1 B Yes Yes Yes No 0.0 to 5.0 A 0000 to
0050 0.0 A
( )
0.0: No heater burnout
detection, alarm signal OFF
5.0: No heater burnout
detection, alarm signal ON
Control output variable
monitor 2 0 No Yes Yes No 0.0% to
100.0% 0000 to
1000 ---
Auto-tuning start/stop
(see note 1) 2 1 Yes No Yes No AT start = 0001
AT stop = 0000 ---
Copy bank 2 2 Yes No Yes No Run = 0001 ---
Sensor-type monitor 2 3 No Yes Yes No 0 to 9 Setting for
SW202
Alarm 1 mode 2 4 Yes Yes Yes No 0 to 9
Mode for Alarm SV 1/2 (0: 2
Alarm 2 mode 2 5 Yes Yes Yes No
Mode for Alarm SV 1/2 (0:
no alarm)
2
Yes: Possible.
No: Not possible or not required.
Note 1. Only when advanced PID control is selected.
2. Only when ON/OFF control is selected.
3. Does not apply to current output. A value of 5.6 (0056) for the heater current
monitor indicates that the heater current value exceeds 5.6 A.
Memory Allocation Section 4-1
Downloaded from Elcodis.com electronic components distributor