manualshive.com logo in svg

Omron SYSDRIVE 3G3MX-A2002, Руководство пользователя, Страница: 2 / 254

Поделиться
Скачать
Omron SYSDRIVE 3G3MX-A2002 Скачать руководство пользователя страница 2

Thank you for choosing this SYSDRIVE 3G3MX-series product. Proper use
and handling of the product will ensure proper product performance, will
lengthen product life, and may prevent possible accidents.
Please read this manual thoroughly and handle and operate the product
with care.

1. To ensure safe and proper use of the OMRON Inverters, please read this USER’S

MANUAL (Cat. No. I559-E1) to gain sufficient knowledge of the devices, safety in-
formation, and precautions before actual use.

2. The products are illustrated without covers and shieldings for closer look in this

USER’S MANUAL. For actual use of the products, make sure to use the covers and
shieldings as specified.

3. This USER’S MANUAL and other related user’s manuals are to be delivered to the

actual end users of the products.

4. Please keep this manual close at hand for future reference.

5. If the product has been left unused for a long time, please inquire at our sales repre-

sentative.

NOTICE

1. This manual describes the functions of the product and relations with other

products. You should assume that anything not described in this manual is
not possible.

2. Although care has been given in documenting the product, please contact your

OMRON representative if you have any suggestions on improving this manual.

3. The product contains potentially dangerous parts under the cover. Do not attempt

to open the cover under any circumstances. Doing so may result in injury or death
and may damage the product. Never attempt to repair or disassemble the product.

4. We recommend that you add the following precautions to any instruction manuals

you prepare for the system into which the product is being installed.

S

Precautions on the dangers of high-voltage equipment.

S

Precautions on touching the terminals of the product even after power has been
turned OFF. (These terminals are live even with the power turned OFF.)

5. Specifications and functions may be changed without notice in order to improve

product performance.

Items to Check Before Unpacking

Check the following items before removing the product from the package:

S

Has the correct product been delivered (i.e., the correct model number and speci-
fications)?

S

Has the product been damaged in shipping?

S

Are any screws or bolts loose?

Содержание SYSDRIVE 3G3MX-A2002































































































































































































































































Отзывы:

Нет отзывов