manualshive.com logo in svg

Omron SYSDRIVE 3G3FV-*-CUE, Руководство по установке

Поделиться
Скачать
Omron SYSDRIVE 3G3FV-*-CUE Скачать руководство пользователя страница 6

www.dadehpardazan.ir 88594014-15

!

!

!

!

!

!

!

!

!

!

!

!

!

Caution

Install external breakers and take other safety measures against short-circuiting in
external wiring. Not doing so may result in fire.

Caution

Confirm that the rated input voltage of the Inverter is the same as the AC power sup-
ply voltage. An incorrect power supply may result in fire, injury, or malfunction.

Caution

Connect the Braking Resistor and Braking Resistor Unit as specified in the manual.
Not doing so may result in fire.

Caution

Be sure to wire correctly and securely. Not doing so may result in injury or damage to
the product.

Caution

Be sure to firmly tighten the screws on the terminal block. Not doing so may result in
fire, injury, or damage to the product.

Caution

Do not connect an AC power to the U, V, or W output. Doing so may result in damage
to the product or malfunction.

Operation and Adjustment Precautions

WARNING

Turn ON the input power supply only after mounting the front cover, terminal covers,
bottom cover, Operator, and optional items. Not doing so may result in electrical
shock.

WARNING

Do not remove the front cover, terminal covers, bottom cover, Operator, or optional
items while the power is being supplied. Not doing so may result in electrical shock or
damage to the product.

WARNING

Do not operate the Operator or switches with wet hands. Doing so may result in
electrical shock.

WARNING

Do not touch the inside of the Inverter. Doing so may result in electrical shock.

WARNING

Do not come close to the machine when using the error retry function because the
machine may abruptly start when stopped by an alarm. Doing so may result in injury.

WARNING

Do not come close to the machine immediately after resetting momentary power
interruption to avoid an unexpected restart (if operation is set to be continued in the
processing selection function after momentary power interruption is reset). Doing so
may result in injury.

WARNING

Provide a separate emergency stop switch because the STOP Key on the Operator
is valid only when function settings are performed. Not doing so may result in injury.

Содержание SYSDRIVE 3G3FV-*-CUE















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды