manualshive.com logo in svg

Omron SYSDRIVE 3G3FV-*-CUE, Руководство по установке

Поделиться
Скачать
Omron SYSDRIVE 3G3FV-*-CUE Скачать руководство пользователя страница 45

www.dadehpardazan.ir 88594014-15

2-26

H

Conformance to EMC Directives

In order to conform to EMC Directives, the exclusive-use methods are required for noise filter applica-
tion, cable shielding, and Inverter installation. The following provides an outline of the methods.

The noise filter and the Inverter must be mounted on the same metal plate. The filter should be mounted
as close to the Inverter as practical. Keep the cable as short as possible (40 cm max.). The metal plate
should be securely grounded. The ground of the noise filter and Inverter must be bonded to the metal
plate using as large an area as possible (after peeling off the paint on the Inverter and the metal plate).

For the mains input cable, screened cable is recommended at least within the control panel. The screen
of the cable should be connected to a solid ground. For the motor cable, screened cable (20 m max.)
must be used and the screen of the motor cable is connected to the ground at both ends by a short
connection, using as large an area as possible.

Ground to the supply neutral, which will increase the effect of the noise filter.

The following table and figures provide the noise filter list for the EMC Directives and the installation and
wiring of the Inverter and noise filter.

Noise Filter List for EMC Directives

Inverter model

Noise filter (manufactured by Schaffner)

3G3FV/3G3HV

Model

Rated current (A)

Weight (kg)

Dimensions

(W

×

D

×

H) (mm)

A4004-CUE

3G3FV-PFS4874-7-07

7

1.1

50

×

126

×

255

A4007-CUE

A4015-CUE

A4022-CUE

3G3FV-PFS4874-18-07

18

1.7

55

×

142

×

305

A4037-CUE

A4055-CUE

3G3FV-PFS4874-30-07

30

2.0

60

×

150

×

335

A4075-CUE

A4110-CUE

3G3FV-PFS4874-42-07

42

3.0

70

×

185

×

329

A4150-CUE

B4185-CUE

3G3FV-PFS4874-55-07

55

3.3

80

×

185

×

329

B4220-CUE

3G3FV-PFS4874-75-34

75

4.3

80

×

220

×

329

B4300-CUE

B4370-CUE

3G3FV-PFS4874-100-35

100

5.7

90

×

220

×

379

B4450-CUE

3G3FV-PFS4874-130-35

130

8.0

110

×

240

×

439

B4550-CUE

3G3FV-PFS4874-180-07

180

11

110

×

240

×

438

B4750-CUE

3G3FV-PFS4874-300-99

300

15

300

×

564

×

160

B411K-CUE

3G3FV-PFS4874-400-99

400

22

300

×

564

×

160

B416K-CUE

AB004-CE

3G3HV-PFS4971-10-07

10

0.7

57.5

×

156

×

45.4

AB007-CE

3G3HV-PFS4971-20-07

20

1.0

85.5

×

119

×

57.6

AB015-CE

AB022-CE

3G3HV-PFS4971-40-07

40

3.0

90

×

246

×

65

AB037-CE

Installation

Chapter 2

Содержание SYSDRIVE 3G3FV-*-CUE















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды