manualshive.com logo in svg

Omron SYSDRIVE 3G3FV-*-CUE, Руководство по установке

Поделиться
Скачать
Omron SYSDRIVE 3G3FV-*-CUE Скачать руководство пользователя страница 3

www.dadehpardazan.ir 88594014-15

Thank you for choosing this SYSDRIVE 3G3FV-

j

-CUE/EF3HV-

j

-CUE (-CE) (Models

Conforming to CE and UL/cUL Standards).  This Installation Manual describes
procedures for installing and wiring the SYSDRIVE 3G3FV-

j

-CUE/EF3HV-

j

-CUE

(-CE) (Models Conforming to CE and UL/cUL Standards). 
Please read this manual thoroughly and handle and operate the product with care. For
details about parameter settings required for operation, troubleshooting, and inspection
methods, please refer to the User’s Manual prepared for each series.

NOTICE

1. This manual describes the functions of the product and relations with other prod-

ucts. You should assume that anything not described in this manual  is not possible.

2. Although care has been given in documenting the product, please contact your

OMRON representative if you have any suggestions on improving this manual.

3. The product contains potentially dangerous parts under the cover. Do not attempt

to open the cover under any circumstances. Doing so may result in injury or death
and may damage the product. Never attempt to repair or disassemble the product.

4. We recommend that you add the following precautions to any instruction manuals

you prepare for the system into which the product is being installed.

S

Precautions on the dangers of high-voltage equipment.

S

Precautions on touching the terminals of the product even after power has been
turned off. (These terminals are live even with the power turned off.)

5. Specifications and functions may be changed without notice in order to improve

product performance.

Items to Check when Unpacking

Check the following items when removing the product from the package:

S

Has the correct product been delivered  (i.e., the correct model number and speci-
fications)? Check the nameplate as shown below.

S

Has the product been damaged in shipping?

S

Are any screws or bolts loose?

Inverter model

Input  specification

Output  specification

Содержание SYSDRIVE 3G3FV-*-CUE















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды