manualshive.com logo in svg

Omron SYSDRIVE 3G3FV-*-CUE, Руководство по установке

Поделиться
Скачать
Omron SYSDRIVE 3G3FV-*-CUE Скачать руководство пользователя страница 26

www.dadehpardazan.ir 88594014-15

!

!

!

!

!

2-7

2-1-2 Installation Conditions

H

Installation Precautions

WARNING

Provide an appropriate stopping device on the machine side to secure safety. (A
holding brake is not a stopping device for securing safety.) Not doing so may result in
injury.

WARNING

Provide an external emergency stopping device that allows an instantaneous stop of
operation and power interruption. Not doing so may result in injury.

Caution

Be sure to install the product in the correct direction and provide specified clear-
ances between the Inverter and control panel or with other devices. Not doing so
may result in fire or malfunction.

Caution

Do not allow foreign objects to enter inside the product. Doing so may result in fire or
malfunction.

Caution

Do not apply any strong impact. Doing so may result in damage to the product or
malfunction.

H

Direction and Dimensions

•

Install the Inverter on a vertical surface so that the characters on the nameplate are oriented upward.

•

When installing the Inverter, always provide the following installation space to allow normal heat dis-
sipation from the Inverter.

W = 30 mm min.

Inverter

Inverter

Inverter

120 mm min.

120 mm min.

Air

Side

Air

Installation

Chapter 2

Содержание SYSDRIVE 3G3FV-*-CUE















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды