!
!
!
!
!
!
!
!
!
!
2-9
2-2
Wiring
H
Cautions and Warnings
WARNING Be sure that the power supply is turned OFF before wiring. Wait for at least one
minute (three minutes for 30-kW or larger models) after turning off the power supply.
Otherwise, an electric shock may occur.
WARNING Wiring must be performed by authorized persons specialized in electrical work.
Otherwise, an electric shock or fire may occur.
WARNING Be sure to check for proper operation after wiring the emergency stop circuit. Other-
wise, physical injury may occur.
WARNING Be sure to connect the ground to the supply neutral. Otherwise, an electric shock or
equipment damage may occur.
WARNING Be sure to ground the ground terminal before connecting the other terminals. When
removing the wiring, remove the ground wire last. Otherwise, an electric shock or
fire may occur.
WARNING Be sure to confirm that the rated voltage of the Inverter coincides with the voltage of
the AC power supply. Otherwise, a fire, injury, or equipment trouble may occur.
WARNING When connecting the braking resistor, Braking Resistor Unit, or Braking Unit, be
sure to follow the instructions specified in the Operation Manual. Otherwise, a fire
may occur.
WARNING Be sure to wire correctly. Otherwise, injury or equipment damage may occur.
WARNING Be sure to firmly tighten the screws on the terminal block. Otherwise, a fire, injury, or
equipment damage may occur.
Caution
Do not connect the AC power to the output terminal T1 (U), T2 (V), or T3 (W).
Otherwise, equipment damage or trouble may occur.
Installation
Chapter 2
AUDIN - 8, avenue de la malle - 51370 Saint Brice Courcelles - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : [email protected]
