No.16S121-03
30/64
STC-MBS891U3V / STC-MCS891U3V / STC-MBS123BU3V / STC-MCS123BU3V
Product Specifications and Use’s Guide
When operating in this mode, the exposure synchronizes the trigger signal.
The exposure time can be controlled by the pulse width of Frame Start trigger.
When the polarity on the Line Inverter is positive (false), the exposure can be controlled at a period of High level
of input trigger signal.
When the polarity on the Line Inverter is negative (true), the exposure can be controlled at a period of Low level
of input trigger signal.
To operate the camera in this mode, the following settings have to be set.
・
Exposure Mode: Trigger Width
・
Trigger Selector: Frame Start
・
Trigger Mode: On
(*) On Trigger Mode except Frame Start should be set Off.
Timing
Delay time on exposure start timing in the sensor
Jitter
(unit:
μ
seconds
)
Image Output Format
STC-MBS891U3V
STC-MCS891U3V
STC-MBS123BU3V
STC-MCS123BU3V
8bits
0 to 6.33
0 to 5.25
10bits
0 to 12.73
0 to 10.51
10bits Packed
0 to 8.22
0 to 6.94
12bits
0 to 12.73
0 to 10.51
12bits Packed
0 to 9.41
0 to 7.92
トリガー入力(正極性)
トリガー入力(負極性)
I/O遅延(tIPDHL)
tPW
tPW
I/O遅延(tIPDLH)
露光
映像出力
LineDebounceTime
TriggerDelay
I/O遅延(tIPDLH)
I/O遅延(tIPDHL)
LineDebounceTime
TriggerDelay
センサー内部の露光開始遅延
センサー内部の露光開始遅延
Exposure
Image Out
Trigger Input
(Positive)
Trigger Input
(Negative)
I/O Delay (tIPDLH)
I/O Delay (tIPDHL)
Exposure Start Duration
inside of sensor
Exposure Start Duration
inside of sensor
I/O Delay (tIPDHL)
I/O Delay (tIPDLH)