Dedicated SCC Edge Controller enables establishment
of a safety system conforming to PLe Safety Category 3
Any short-circuits or breaks in the system are
monitored and its status is indicated with LED.
Authentificated under major safety standards
By covering just 4 points, a ready-to-use Safety Edge will be delivered to you:
Note: For details, refer to "Model Number Structure" on page 4 or later.
Dedicated SCC Edge Controller that regulates a system conforming to Safety Category 3.
We have prepared a lineup, tailor-made to fit with your devices and applications.
When using applications that require
increased water resistance, please
use models that give sealing covers.
Select a shape from five series as required
in your application or equipment
Select any length from 150 mm to 6,100 mm with
increments of 50 mm.
An L-shaped mounting base is also provided
depending on the mounting location
(except the SGE-125 series)
Select wiring from four types (2-wire/connector
(male/female) cable, terminating resistor) and
cable length 100 mm or any length from 500 mm
to 10,000 mm with increments of 500 mm for both
ends of the Safety Edge.
SGE-245
SGE-365
SGE-225
SGE-125
Extensive Lineup
Easy to Order & Assembly Free
SCC Edge Controller
Sensor length
150 to 6,100 mm
(in 50 mm increments)
Height
34 to 80 mm in six series
SGE-245L
Shape
Wiring
Length
Mounting base
POINT
1
POINT
2
POINT
3
POINT
4
50mm 50mm 50mm 50mm
W
in
u
Power supply LED indicator
Active LED indicator
Error LED indicator
Auxiliary output LED indicator
Note: For details on LED indicators, refer to "Connection" on page 13.
(when hazards are directly blocked by built-in relays)
