![background image](http://html1.mh-extra.com/html/omron/scara-robots-yrcx-series/scara-robots-yrcx-series_user-manual_743777006.webp)
Impor
tant inf
or
ma
tion bef
or
e r
eading this manual
2
Safety Precautions (Always read before starting use)
Before using this product, be sure to read this manual carefully as well as the robot controller user's manual
and programming manual. Take sufficient precautions to ensure safety and handle the product correctly.
The cautions given in this manual are related to this product. Refer to the robot controller user's manual for
details on the cautions to be taken with the robot controller system using this product.
The safety precautions are ranked as "WARNING" and "CAUTION" in this manual.
WARNING
FAILURE TO FOLLOW WARNING INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH TO THE OPERATOR OR
PERSON SERVICING THE PRODUCT.
CAUTION
Failure to follow CAUTION instructions may result in injury to the operator or person servicing product, or damage
to the product or peripheral equipment.
NOTE
The key points in the operation are explained simply and clearly.
Note that some items described as "CAUTION" may lead to serious results depending on the situation. In any
case, important information that must be observed is explained.
Store this manual where it can be easily referred to, and make sure that it is delivered to the end user.
■
Precautions for design
WARNING
• FOR INFORMATION ABOUT THE STATUS OF THE NETWORK SYSTEM AND ROBOT CONTROLLER IN THE EVENT THAT A
COMMUNICATION PROBLEM OCCURS IN THE NETWORK SYSTEM, REFER TO THE MANUAL OF THE HOST CONTROL
DEVICE AS WELL AS TO THIS DOCUMENT. CONFIGURE AN INTERLOCK CIRCUIT IN THE SEQUENCE PROGRAM SO
THAT THE SYSTEM, INCLUDING THE ROBOT CONTROLLER, WILL WORK SAFELY WITH USING THE COMMUNICATION
STATUS INFORMATION.
• THE SAFETY CONNECTOR HAS AN EMERGENCY STOP TERMINAL TO TRIGGER EMERGENCY STOP OF THE ROBOT
CONTROLLER. BY USING THIS TERMINAL, PREPARE A PHYSICAL INTERLOCK CIRCUIT SO THAT THE SYSTEM INCLUDING
THE ROBOT CONTROLLER WILL WORK SAFELY.
CAUTION
The control line and communication cable must not be bound with or placed near the main circuit or power line.
Separate these by at least 100mm. Failure to observe this could lead to communication error or declining
throughput caused by noise.
Содержание SCARA Robots YRCX Series
