Omron NT11S, Руководство по эксплуатации

Страница: 73 / 183

57
Setting the Conditions of Communications with the PC by Using the Memory Switches
Section 3-7
3-7 Setting the Conditions of Communications with the PC by
Using the Memory Switches
The communications between the NT11S and a PC are called the host commu-
nications.
The NT11S can be connected to a PC by the host link or NT link. The link can be
selected by setting the memory switch. Also, the host link baud rate, automatic
reset function, etc. are set with the memory switches.
This section describes the communications condition settings by using the
memory switches.
Memory Switches The NT11S has the memory areas used to store the PC connection method, com-
munications conditions, system settings, etc. which can be used as the switches
and called the “memory switches”. Since the memory switches use the flash
memory, the stored data can be held even when the power supply is turned OFF.
Setting Functions and the Memory Switch Menu
The memory switches can be set easily by using the memory switch menu in the
System Menu.
The following settings can be made with the memory switches. Refer to the subse-
quent pages for the details of each setting and function.
Page:
Backlight OFF 10min
Auto-restart Yes
Page:
Comm. Type Host Link
Baud Rate
9600BPS
Comm. Port RS-232C
key
key
[ Memory switch menu ]
Backlight OFF 3-9-2 Backlight OFF Functions (page 63)
Auto-restart 3-7-3 Selecting the Automatic Reset Function
(page 60)
Comm. Type Host Link 3-7-1 Selecting the Host Communication Method
(page 58)
Baud Rate 3-7-2 Selecting the Host Link Communication Speed
(page 59)
Comm. Port 3-7-4 Selecting the Channel for Communication with
the PC (page 61)