manualshive.com logo in svg

Omron HD-1500 Platform, Руководство пользователя

Поделиться
Скачать
Omron HD-1500 Platform Скачать руководство пользователя страница 209

CAUTION

• Follow all appropriate local safety regulations for working with isopropyl alcohol, in-

cluding fire safety, toxicity, and protective clothing and gear requirements.

• Any electrical charge that accumulates on the AMR skins does not have a path to

ground, and therefore cannot discharge. This can be hazardous to electrostatic sen-
sitive devices. Always keep electrostatic sensitive devices at least 30 cm away from
the AMR skins.

Precautions for Correct Use

Maintenance of the payload structure is not covered in this document and is the responsibility of
the end-user.

6 Maintenance

6-3

HD-1500 Platform User's Manual (I645)

6-1 Maintenance Introduction

6

 

Содержание HD-1500 Platform

































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды