Omron HBP-9020, Инструкция по эксплуатации

Страница: 25 / 40

23
Function Selection Mode
Function selection mode allows various settings and special functions to be used.
(The settings are retained even if an interruption in the power supply occurs.)
How to enter function selection mode and change settings
To enter function selection mode, hold the [MODE] switch and then the [START/STOP] switch for
at least 3 seconds until a beep sounds.
(If the volume is set to "0" in function selection mode, a confirmation beep will not sound.)
* If no action is taken for about one minute in function selection mode, the display will return to the standby display.
1.
Select the item by pressing the
▲
/
▼
switches.
2.
Change the setting by pressing the
[START/STOP] switch.
3.
To change other items, repeat steps 1 and 2.
4.
Exit "Function selection mode" by
pressing the [MODE] switch.
The setting appears.
The item number appears.
HBP-9020.fm 23 ページ ２０１０年７月９日 金曜日 午前８時５９分