H5AN
Installation
■
Terminal Arrangement
■
Connections
Power Supply Connection
Connect the required supply voltage to terminals 1 and 2.
Load Connection
Terminals 4, 5, and 6 are for contact output while terminals 12 and
13 are for solid-state output. (Terminal 14 is connected to absorb the
surge if an inductive load is connected.)
The control outputs of both contact type and solid-state type are
simultaneously available.
Load Operation
Gate input
Reset input
(0 V)
+12 V
+12 V
Contact output
Unused
Power supply
For DC power
Terminal 1:
−
Terminal 2: +
Unused
(Internally
connected)
Do not use unused
terminals for relaying.
Leave them open.
Note:
Specifications for 12- to 24-VDC, 48-VDC, and 100-VDC
models are listed separately in this datasheet.
External
power
supply
AC Power Supply
DC Power Supply
Load 3
(See
note.)
When a Load Operates with Contact Output
When a Load Operates with Solid-state Output
Load 1
Load 2
(See note.)
Note:
Output transistor ON: Low (0 V)
Output transistor OFF: High (12 V)
Note:
Connect a diode when using a Power Supply of 12 V or less.
http://www.ia.omron.com/
8
(c)Copyright OMRON Corporation 2008 All Rights Reserved.