Box Contents
Hose Faucet Timer
Wi-Fi Hub
Quick Start Guide
1) Open the B-hyve App
Log into your B-hyve account and go to
devices under settings to add the Hose
Faucet Timer as a new device. The app will
walk you through the rest of the process.
For new users, search for “B
-
hyve” and
download the free Android or iOS app.
Create an account to begin timer setup.
3)
Enter Pairing Mode
Press the B-hyve button to enter into
pairing mode. Your hub will flash a
blue light every 5 seconds.
4)
Power Your Hose Faucet Timer
Insert two new AA Batteries*, the timer is now in
pairing mode and will flash a blue light every 5 seconds.
You will also hear two clicks about 6 seconds apart, this
is normal and ensures the valve is closed before you
turn on the water.
Write down the MAC address: 12 digit alphanumeric
code on the bottom of the timer.
Timer MAC Address:
——
:
——
:
——
:
——
:
——
:
——
If at any time you need to re-pair or do a
factory reset, press the on/off button
quickly 5 times.
*Batteries are sold separately. Replace batteries
when timer flashes a red light every 5 seconds,
or when the app notifies you that batteries
need replacing.
If you remove or change the batteries you
will need to reconnect to Bluetooth® to set the
correct time and date.
5)
Install the Timer
Your timer is now ready to be
used with any product that can be
attached to a standard hose faucet.
Do not place the timer in an
underground valve box.
6)
Turn on Your Water
The water must remain on for
the timer to work properly.
Write down the MAC address:
12-digit alphanumeric code on the back of the hub.
Plug the hub into an indoor outlet within range of
your B-hyve device and Wi-Fi signal.
Avoid areas where the signal
must travel through dirt or thick
steel barriers.
