V5
75
5-
58
1-
02
0
1/1
5
1
Display timer moduleArt. no. MEG5755-03../-04..© Schneider-Electric 2014V5755-581-0201/15
– Complete the display timer module with:
• Corresponding inserts (see function overview)
• Frame in design System M
¼
DANGER
Risk of serious damage to property and per-
sonal injury, e.g. from fire or electric shock,
due to incorrect electrical installation.
Safe electrical installation can only be ensured if
the person in question can prove basic knowl-
edge in the following areas:
• Connecting to installation networks
• Connecting several electrical devices
• Laying electric cables
These skills and experience are normally only
possessed by skilled professionals who are
trained in the field of electrical installation technol-
ogy. If these minimum requirements are not met
or are disregarded in any way, you will be solely li-
able for any damage to property or personal inju-
ry.
|
From version 1.5 the following functions are avail-
able:
• Two global scenes can be retrieved via push-
buttons
• Automatic deactivation of display lighting can
be selected
After plugging the module onto the insert for the first
time, information on the module type and module version
are displayed for one second each.
Display timer module
Operating instructions
Art. no. MEG5755-03../-04..
Necessary accessories
For your safety
Module version
en
In combination with different inserts, you can carry out
various functions with the display timer module (referred
to below as
module
), such as:
• switching, dimming and controlling blinds manually
• time-controlled switching and controlling of blinds
Product features:
• Simple operation using five push-buttons
• Adjustable date and time
• Number of switching cycles (switching on/off, raising/
lowering):
–
Switching, dimming, blind inserts:
per channel: 2 switching cycles/day
–
Central unit insert:
per PL line: 2 switching cycles/day
• Switching times preset at the factory, but can be
changed later
• Switching to manual mode possible
• Global control (max. 4 PL lines) and separate line con-
trol
• Saving scenes is possible
• Two global scenes can be retrieved via push-buttons
(from version 1.5)
• Astro function (control by astronomical pre-calculation
of sunrise and sunset)
• Adaptation of astro function using specific astro time
shift
• Random function ranging from 0-30 minutes
• Evaluating DCF timer
• Automatic summer/winter time switchover
• Individually adjustable blind movement time
• Adjustable brightness threshold for sun protection
function
• Adjustable response for wind alarm
• Adjustable display brightness
• Automatic deactivation of display lighting can be se-
lected (from version 1.5)
• Power reserve of at least 6 hours in the event of a pow-
er failure
• Reset (restore default settings)
Table of Content
Getting to know the display timer module
1
Connections, displays and operating elements
2
Mounting the module
2
Getting to know the basic functions
3
Getting to know the menu
3
Setting module: Basic menu settings
3
Setting module: Advanced menu
4
Notes on advanced functions
6
Operating the module
7
Blind control
8
Light control
8
Global blind and light scenes
8
Controlling loads from another location via PlusLink 8
What should I do if there is a problem?
8
Technical data
9
Getting to know the display timer
module
Overview of module functions on re-
ceiving inserts
Complete the module with the receiving inserts for
switching, dimming or controlling blind/roller shutter in
order to carry out
local
light and blind control.
Function overview of the module on
sending insert
Complete the module with the sending central unit insert
in order to carry out
global
light and blind control via the
PlusLink (PL)
.
Switching:
• Electronic
switch insert
• Relay switch in-
sert
• switching on/off manually
• time-controlled switching on/off
• evaluating DCF timer
• Electronic
switch insert, 2-
gang
• Relay switch in-
sert, 2-gang
• manually switching on/off both
channels together
• time-controlled switching on/off of
both channels separately or to-
gether
• evaluating DCF timer
Dimming:
• Universal dim-
mer insert
• Control insert
1-10 V
• DALI insert
• switching and dimming manually
• time-controlled switching
• evaluating DCF timer
• Universal dim-
mer insert, 2-
gang
• manually switching and dimming
both channels at the same time
• time-controlled switching of both
channels separately or together
• evaluating DCF timer
Controlling blinds/roller shutter:
• Blind control in-
sert
• raising/lowering manually
• time-controlled raising/lowering
• Sun protection function
• Wind alarm function
• disabling blind movement (with
magnetic contact)
• evaluating DCF timer
Global light and blind control:
• Central unit in-
sert
• manual control for all PL lines to-
gether:
switching, dimming, lowering/
raising (push-button function) or
retrieving scenes (scene function
from version 1.5)
• time-controlled for all PL lines to-
gether or each PL line separately:
switching, raising/lowering
• evaluating DCF timer
