Omron FZ3 Series, Руководство пользователя

Страница: 300 / 304

8
Appendixes
298 About Memories Usable with FZ Series FZ3 User's Manual
About Memories Usable with FZ Series
The following types of memory can be used with the FZ series.
On-board memory
This is the area where images are temporarily stored when logging images using the logging function.
This uses ring memory and if the maximum number of images has been reached, images are
overwritten starting with the oldest.This is cleared when the power is turned OFF.
RAM disk
Image logging file, data logging file, and capture images can be saved.
As this is memory inside the FZ3, files can be saved and read faster than using USB memory.
However, capacity is a fixed 40 MB.Files saved in RAM disk are cleared when the power is turned OFF.
Application memory
Memory used for all applications.
Memory area that is used temporarily by applications.By confirming remaining capacity, this provides a
rough standard for confirming status while operating. The user cannot access this memory.
Data memory
Area for holding current settings details of scene group data.
If this capacity is exceeded, adding units and copying scenes cannot be performed in edit flow.
Available data memory can be confirmed from the system menu.
Reference:
Checking System Information [System Information] (p.119)
Acesst 1.0 6251194