Omron F3SN-B P Series, Инструкция по эксплуатации

Страница: 51 / 78

Section 1 Description
B-6
Type
Item
F3SN-B P25 F3SN-B P40 F3SN-B P70
Ambient light intensity
Incandescent lamp : 3,000 Ix max. (light intensity on the receiver surface)
Sunlight
: 10,000 Ix max. (light intensity on the receiver surface)
Insulation resistance 20 M
Ω
min. (at 500 VDC)
Dielectric strength voltage 1000 VAC 50/60 Hz 1 minute
Degree of protection IP65(IEC60529)
Vibration resistance Normal operation : 10 to 55 Hz, double amplitude 0.7 mm, X, Y and Z directions 20 sweeps
Shock resistance Normal operation : 100 m/s
2
, X,Y and Z directions 1000 times
Cable (optional) *3
UL20276 (flame-resistant:), 8 cores (0.3 mm
2
x 4pairs), external diameter 6.6 mm,
with braided wire shield, allowable bending radius: R36 mm
Materials
Case : Aluminum
Cap : Zinc die-cast
Optical cover : PMMA (acrylic resin)
Cable : Oil-proof PVC
Weight *Packaged
Calculate with the following equation:
Weight of light curtain with protective height of 180 mm to 738 mm (g)
= (Protective 100) x 2 + 1300)
Weight of light curtain with protective height of 747 mm to 1402 mm (g)
= (Protective 100) x 2 + 1700)
Weight of light curtain with protective height of 1417 mm to 1822 mm (g)
= (Protective 100) x 2 + 2100)
Accessories
Test rod *4, Instruction manual, Mounting brackets (top and bottom),
Mounting brackets (intermediate)*5, Error mode label
Applicable standard
IEC61496-1, EN61496-1 TYPE 2 ESPE (Electro-Sensitive Protective Equipment)
IEC61496-2 TYPE 2 AOPD (Active Opto-electronic Protective Devices)
*1.
Please note that the operation may differ from conventional ON/OFF switching because of the safety circuit.
*2. Flashing after a lapse of 30000 hours as an indicator of preventive maintenance.
*3.
When extending the cable(100 m max), be sure to use a cable with at least same performance. Be sure to
route the F3SN-B cable separated from high-potential power lines or through an exclusive conduit.
*4.
Test rod is not supplied with the F3SN-B P70.
*5.
The intermediate mounting bracket is supplied with the following types:
Types which have the total length of the light curtain from 640 mm to 1280 mm: 1 set for each of emitter and
receiver
Types which have the total length of the light curtain over 1280 mm: 2 sets for each of emitter and receiver
1-3-2 Response time
The response time of OSSD outputs are as follows:
Protective
height(mm)
No. of beams Response time
(ON to OFF)
Response time
(OFF to ON)
217 to 772 13 to 50 10.0 40
787 to 1297 51 to 85 12.5 50
F3SN-B P25
1312 to 1822 86 to 120 15.0 60
217 to 757 7 to 25 10.0 40
787 to 1297 26 to 43 12.5 50
F3SN-B P25
1327 to 1807 44 to 60 15.0 60
277 to 757 5 to 13 10.0 40
817 to 1297 14 to 22 12.5 50
F3SN-B P25
1357 to 1777 23 to 30 15.0 60
Response time of F3SP-B1P is 10 ms, operation time is 100 ms.
[Note]:
If the controller is included in the set, calculate safety distance by adding the controller response
time to the F3SN response time.