Appendix A —Checkout Procedure
A-1 Checkout Procedure Log
27
Appendix A —Checkout Procedure
A-1 Checkout Procedure Log
The following checkout procedure must be performed by qualified personnel during initial F3SL system installa-
tion and at least every three months or more frequently depending on machine usage and company guidelines.
Machine Identification: Date:
Technician Signature:
Item
Condition
Comments
1. Verify that the guarded machine is compatible with the type of machine
which maybe used with the F3SL system. See Section 1—Important
Safety Warnings for further information.
Pass
Fail
2. Verify that the mounting distance of the F3SL system is equal to or
greater than the minimum safe distance from the danger point. See Sec-
tion 8—Safe Mounting Distance for further information.
Pass
Fail
3. Determine that all access to the danger point not protected by the F3SL
system is guarded by other means, such as gates, fencing or other
approved methods. Verify that all additional guarding devices are installed
and operating properly.
Pass
Fail
4. Make sure the operator is not able to stand between the F3SL system
detection zone and the machine danger point. Verify that the light curtain
can only be reset from a position outside and within view of the hazardous
machine area.
Pass
Fail
5. Inspect the electrical connections between the guarded machine’s con-
trol system and the F3SL system. Verify that they are properly connected
to the machine such that a stop signal from the F3SL system results in an
immediate halt of the machine’s cycle. See Section 10—Connecting To
The Machine Control Circuit.
Pass
Fail
6. If the MPCE monitoring feature is not used, proceed to step 7. To test
the MPCE feature, verify that the feature has been enabled. Turn the
machine power on. Cycle the machine. Place a temporary jumper wire
between the MPCE connections. The F3SL should enter a alarm condi-
tion. Remove the temporary jumper. Press and release the start button.
Pass
Fail
7. Record the test results in the machine log, then perform the Test Proce-
dure.
Pass
Fail
Содержание F3SL
Страница 2: ......
