Omron F160 Vision Sensor, Руководство по эксплуатации, Страница: 72 / 148

63
Surface
Section 3-6
3-6 Surface
Surface inspections check for defects and impurities within a specified range.
SeeAlso
Refer to page 3 Inspection Types.
The settings operation is shown in the following diagram. Only the outline will
be given here. Follow the instructions given by the operational guide on the
Monitor screen.
3-6-1 Selecting Surface
Select Surface on the screen for selecting inspection types.
3-6-2 Specifying Inspection Regions
1. Decide the upper left point for a box that will enclose the inspection region
and then set the lower right point.
Up/Down and Left/Right Keys: Move the arrow cursor.
SHIFT + Up/Down and Left/Right Keys: Move the arrow cursor quickly.
ENT Key: Sets the position.
2. Follow the instructions provided by the on-screen operational guide to
make the rest of the settings.
Set inspection details.
2
Add
inspection
details.
2.
Specify
points to
inspect.
1.
Select
Surface.
1 Add
End
Return to
screen to
select type of
inspection.
STEP
4
Scn 0 =SET= Region
Select the type of
inspection.
(Up to 32 regions)
S+ENT:Help S+
←→
:Switch display
Start
Ref image
>>Region
Position
End
Presence
Orient'n
Dimens'n
Surface
Conform
Position
Chip/Bur
Back
0.Scn 0 =SET= Region
↑ ↓←→
: Move ENT:Set ESC: Back
Enclose the area to
be inspected.
0.Surface 355,331