Omron F160 Vision Sensor, Руководство по эксплуатации, Страница: 22 / 148

13
Starting the F160 and Displaying Images
Section 2-1
SeeAlso
Refer to page 102 for information on the Camera Settings Screen.
5. Select the Camera model to be connected.
6. When using Intelligent Lighting, select the model.
7. Select END.
The Basic Screen for the Conversational Menus will be displayed.
CHECK
When the settings have been completed, it is useful to use Startup Mode
when actually operating the F160. Startup Mode is used to set the startup
conditions (display screen) when the F160 is next started. For example,
set the F160 to start in Run Mode. This will allow measurements to be
started immediately and will make day-to-day operations easier. (Refer to
page 118.)
CHECK
You can select whether or not to display the Select Menus or Camera Set-
tings Screens when starting the F160. (Refer to page 118.)
2-1-2 Displaying Images and Focussing
1. Check that the inspection object is displayed on the monitor screen.
If it is not displayed, adjust the position of the inspection object so that it
appears in the center of the monitor screen.
2. Focus the Camera.
---- ---ms
0.Scn 0 MON
For a new scene,
press ENT at MON and
then select SET from
the menu.
---- ---ms
0.Scn 0 MON
For a new scene,
press ENT at MON and
then select SET from
the menu.
Adjusting the position of the inspection object.