!
!
7-2
Section
Regular Inspections
57
7-2
Regular Inspections
To maintain the F150 in the best condition, perform the following
regularly.
•
Lightly wipe off dirt with a soft cloth.
•
Clean the Lens and indicators with a special lens cloth or air-
brush.
Inspection point
Details
Tools required
Power supply
The voltage measured at
the power supply terminals
on the terminal block must
be 24 VDC
+10%
/
–15%
.
Circuit tester
Ambient
temperature
The operating ambient
temperature inside the
cabinet must be between
0 and 50
°
C.
Thermometer
Ambient humidity
The operating ambient
humidity inside the cabinet
must be between 35% and
85%.
Hygrometer
Installation
Each component must be
firmly secured.
Each cable connector must
be correctly inserted and
locked.
The Cameras must be
firmly secured.
The camera lens mounts
must be firmly secured.
Phillips
screwdriver
Indicators
All indicators must light
when the power is turned
ON.
---
Caution
Turn OFF the power and take safety precautions before conduct-
ing inspections. Electrical shock can result from attempting
safety inspections with the power turned ON.
Caution
Do not use thinners or benzene. They will damage F150 compo-
nents.
Содержание F150-2
