Omron E5ZE-8 D1 B-V2, Техническое описание

Страница: 3 / 8

Multipoint Temperature Controller
E5ZE-8 @D1@B-V2
3
Specifications
■
Ratings
Supply voltage 24 VDC
Operating voltage range 85% to 110% of rated supply voltage
Power consumption 15 W + 20% max. at rated supply voltage
Input Input type Thermocouple: K, J, R, S, T, E, B, N, L, U, W, PL-II
Platinum resistance thermometer: Pt100, JPt100
Input impedance Thermocouple: 1 M
Ω
min.
Rated platinum resistance
thermometer current 1 mA
Control
outputs Standard (Heating side) Voltage output (with short-circuit protecting function)
ON: 12
±
1.2 VDC
OFF: 0.5 VDC max.
Max. load current: 30 mA DC per point
Current output
Rated output range: 4 to 20 mA DC
Current output range: 0 to 22 mA DC
With an output value of 0%: 4
+0
/
–0.6
mA DC
With an output value of 100%: 20
+2
/
–0
mA DC
Max. load resistance: 600
Ω
per point
Cooling side Open collector output (NPN)
Max. applied voltage: 30 VDC
Max. load current: 50 mA DC per point
ON residual voltage: 2 VDC max.
OFF leakage current: 1 mA DC max.
Alarm outputs Temperature alarm: The total output of all control points (alarm 1 NPN open collector output and
alarm 2 NPN open collector output)
HB alarm (heater burnout detection): Total output of all control points (1-point NPN open collector
output)
HS alarm (SSR failure detection): Total output of all control points (1-point NPN open collector
output)
Temperature controller error output (memory, set value, or hardware error):
1-point NPN open collector output
Max. applied voltage: 30 VDC
Max. load current: 50 mA DC per point
No. of input control points 8 input and 8 control points
Setting method Via communication
Control modes ON/OFF control
Hybrid of advanced PID control and fuzzy control
Manual operation
Memory bank input No. of points: 8 for each control point
Designation method: Through communication or memory bank designation input
Memory bank designation inputs With contact signal input
ON short-circuit resistance: 1 k
Ω
max.
OFF open resistance: 100 k
Ω
min.
With no-contact signal input
ON residual voltage: 2 VDC max.
OFF leakage current: 1 mA DC max.