Omron DeviceNet 3G8F7-DRM21-E, Руководство по эксплуатации

Страница: 13 / 149

xiv
Intended Audience
1
1 Intended Audience
This manual is intended for the following personnel, who must also have
knowledge of electrical systems (an electrical engineer or the equivalent).
• Personnel in charge of installing FA systems.
• Personnel in charge of designing FA systems.
• Personnel in charge of managing FA systems and facilities.
2 General Precautions
The user must operate the product according to the performance specifica-
tions described in the operation manuals.
Before using the product under conditions which are not described in the
manual or applying the product to nuclear control systems, railroad systems,
aviation systems, vehicles, combustion systems, medical equipment, amuse-
ment machines, safety equipment, and other systems, machines, and equip-
ment that may have a serious influence on lives and property if used
improperly, consult your OMRON representative.
Make sure that the ratings and performance characteristics of the product are
sufficient for the systems, machines, and equipment, and be sure to provide
the systems, machines, and equipment with double safety mechanisms.
This manual provides information for installing and operating the DeviceNet
PCI Board. Be sure to read this manual before operation and keep this man-
ual close at hand for reference during operation.
!WARNING
It is extremely important that all control products be used for the specified pur-
pose and under the specified conditions, especially in applications that can
directly or indirectly affect human life. You must consult with your OMRON
representative before applying an OMRON control system to the abovemen-
tioned applications.
3 Safety Precautions
!WARNING
Never attempt to disassemble the Board or touch the Board while power is
being supplied. Doing so may result in serious electrical shock or electrocu-
tion.
!WARNING
Provide safety measures in external circuits, i.e., not in the Programmable
Controller (CPU Unit including associated Units; referred to as “PLC”), in
order to ensure safety in the system if an abnormality occurs due to malfunc-
tion of the PLC or another external factor affecting the PLC operation. Not
doing so may result in serious accidents.
1,2,3... 1. Emergency stop circuits, interlock circuits, limit circuits, and similar safety
measures must be provided in external control circuits.
2. The PLC will turn OFF all outputs when its self-diagnosis function detects
any error or when a severe failure alarm (FALS) instruction is executed. As
a countermeasure for such errors, external safety measures must be pro-
vided to ensure safety in the system.