manualshive.com logo in svg

Omron DA0271, Руководство для стартапов

Поделиться
Скачать
Omron DA0271 Скачать руководство пользователя страница 6

4 

 

Precautions 

 

• When building a system, check the specifications for all devices and equipment that will make 

up the system and make sure that the OMRON products are used well within their rated 
specifications and performances. Safety measures, such as safety circuits, must be 
implemented in order to minimize the risks in the event of a malfunction. 

• Thoroughly read and understand the manuals for all devices and equipment that will make up 

the system to ensure that the system is used safely. Review the entire contents of these 
manuals, including all safety precautions, precautions for safe use, and precautions for 
correct use. 

• Confirm all regulations, standards, and restrictions that the system must adhere to. 
• Contact The MathWorks® Inc. for the codes that were outputted from Simulink® PLC 

Coder™. 

• Applicability of codes that were outputted from Simulink® PLC Coder™ must be judged by 

the customer. 

• Check the user program for proper execution before you use it for actual operation. 

 

Trademarks 

• Sysmac and SYSMAC are trademarks or registered trademarks of OMRON Corporation in 

Japan and other countries for OMRON factory automation products. 

• EtherCAT® is registered trademark and patented technology, licensed by Beckhoff 

Automation GmbH, Germany. 

• MATLAB® and Simulink® are registered trademarks of The MathWorks® Inc. 
• Microsoft product screen shot(s) reprinted with permission from Microsoft Corporation. 

Other company names and product names in this Guide are the trademarks or registered 
trademarks of their respective companies. 

 

Software Licenses and Copyrights 

The NJ-series CPU Units and Sysmac Studio incorporate certain third party software. The license and 
copyright information associated with this software is available at http://www.fa.omron.co.jp/nj_info_e/.

Содержание DA0271







































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды