Omron CXONE-ALD-V4 - 10-2010, Руководство по эксплуатации

Страница: 65 / 144

49
Two-position ON/OFF (Block Model 001) Section 6-3
1: MV Status Display
The status is displayed according to the contact information of tag ITEM MV
(ITEM 093), as shown in the following table.
These objects are created as rectangular Bit Lamp objects.
2: Switch to MV Buttons
These buttons switch the Contact information of tag ITEM MV (ITEM 093).
These buttons are created as momentary ON/OFF Buttons, using a Select
Shape of type 1, and with no write address set. (Macros are used to write
data.)
The button surface is displayed according to the Select Shape graphic.
When the button is touched, the tag ITEM A/M_SW (ITEM 086) is referenced,
and if the value is 1, a message is displayed indicating that setting is not pos-
sible, and setting is disabled.
This function is set using the following macro as a Touch OFF Timing macro
for ON/OFF Buttons.
3: Status Display 2
The MV error indication (tag ITEM MV_ABN) is not provided with 2-position
ON/OFF, so the PV error status is only displayed. The status character string
displayed is determined by the value of tag ITEM PV_ABN.
Lamp Color
Red: MV (ITEM 093) is OFF.
Green: MV (ITEM 093) is ON.
Red: MV (ITEM 093) is ON.
Green: MV (ITEM 093) is OFF.
Button Operation
Turns OFF MV (ITEM 093).
Turns ON MV (ITEM 093).
Display PV_ABN (ITEM 019)
(No characters
displayed) 0
PV error indication 1
for 0.
for 1.