OMRON ELECTRONICS LTD
●
Technical Support: 0870 752 0871 or visit www.myOMRON.com
29
NQ3 HMI application…
Open NQ-Designer from
Start
>
Programs
>
OMRON
>
NQ-Designer
…
Launch the application, then select
Project
>
Open
Browse to the
SOFTWARE
folder on the Resource CD >
NQ3 HMI DEMO
>
LeanKitDemoNQ3
sub-folder and select the
LeanKitDemoHMI.nqp
file and click
Open
…
Plug the USB cable (CP1W-CN221) between your PC’s USB port and the NQ3 HMI’s
“SLAVE” port at the rear of the unit.
If this is the first time you have connected an NQ HMI, Windows will display “
Found New
Hardware: HMI USB Device
”
Select the “Install from a specific location” option, then browse to
C:\Program
Files\OMRON\NQ-Designer\USBDrivers\
then click “Next” to install the driver. If the
Hardware Installation
dialog is displayed, click
Continue Anyway
to complete the
installation.
Further details can be found on page 20 of the “V07-EN-01 NQ Getting Started Guide”
(see
Resource CD > TECHNICAL DOCUMENTATION > NQ-SERIES HMI)
From the
Project
menu, select
Transfer
then
Download
…
