Omron COMP Air Elite NE-C30, Инструкция по эксплуатации

Страница: 15 / 68

2. After the battery is fully charged, remove the battery from the charger.
The green charging indicator changes from blinking to remaining lit continuously
when the battery is fully charged.
1) While pressing the button on the side of the
battery, lift the battery off the charger.
2) Unplug the AC adapter from the power outlet,
then disconnect the charger.
NOTES:
• If the charging indicator does not blink when the battery is mounted correctly,
immediately disconnect the charger and refer to “Troubleshooting Tips” on
page 28.
• When charging a battery, check that the charging indicator blinks to indicate that
the battery is charging.
• When removing a battery from the charger, make sure that the charging indicator
is lit.
3. Mount the compressor on the battery.
Align the connector on the bottom of the compressor with that on the battery and mount
the compressor on the battery. Push the compressor down until it clicks into place.
NOTE:
To separate the compressor and battery, press the push
button on the side of the battery and lift the compressor off
the battery.
HOW TO PREPARE THE NEBULIZER FOR USE
14
Push Button
Charging Indicator
remains lit
Push button
NE-C30-C3_C_M.qxd 11.11.24 4:15 PM Page 14