5
.
Applicable Devices and Device Configuration
6
5.2. Device Configuration
The hardware components to reproduce the connection procedures of this document are as
follows:
Manufacturer
Name
Model
Version
OMRON
Serial Communications Unit
CJ1W-SCU42
Ver.2.0
OMRON
CPU Unit
CJ2M-CPU12
Ver.2.0
OMRON
Power Supply Unit
CJ1W-PA202
OMRON
CX-One
CXONE-AL[][]C-V4
/AL[][]D-V4
Ver.4.[][]
OMRON
CX-Programmer
(Included in CX-One)
Ver.9.54
OMRON
CX-Programmer project file
OMRON_3G3MX2-V1_M
od485_EV100.cxp
Ver.1.00
-
Personal computer
(OS: Windows 7)
-
-
USB cable
(USB 2.0 type B connector)
-
-
Serial cable (RS-485)
-
OMRON
Inverter
3G3MX2- A2002-V1
V2.0
Precautions for Correct Use
Prepare a latest project file beforehand.
To obtain a project file, contact your OMRON representative.
Precautions for Correct Use
Update CX-Programmer to the version specified in this clause or higher version.
If you use a version higher than the one specified in this clause, the procedures and related
screenshots described in
Section 7.
and subsequent sections may not be applicable. In that
case, use the equivalent procedures described in this document by referring to the
CX-Programmer OPERATION MANUAL
(Cat. No. W446).
Precautions for Correct Use
Turn ON the terminating resistance switch on Serial Communications Unit and connect a 100
to 125Ω(1/2W) terminating resistor to the end of Inverter on RS-422A/485 port.
Serial cable
(RS-485)
CJ2M-CPU12+
CJ1W-SCU42
Personal computer
(CX-One installed,
OS: Windows 7)
USB cable
3G3MX2- A2002-V1
Содержание CJ2*-CPU Series
Страница 63: ...58...
Страница 64: ...2015 1115 P641 E1 01...