Omron BU2002RWL, Инструкция по эксплуатации

Страница: 41 / 78

3
.Operation
29
3-3 Interpreting beeps and displays
No.
Status
indicator
Mode Beep Description Solution
1 Standby
Mode None Power switch OFF
Operation stopped -
2 Commercial
Power Mode None Power switch ON
Operating normally -
3 Bypass
Mode None AC input is bypassed to the
output due to an internal failure
of the UPS or other reason Refer to the message
displayed on the LCD.
4 Test Mode None Self-diagnostic test in progress Commercial Power Mode
is recovered after a
certain period of time.
5 UPS Event None Waiting; startup conditions are
not fulfilled Refer to the displayed
message.
6 Battery
Mode Intermittent
4-second
Backup is operating due to
power failure or AC input error Shut down the connected
devices to stop them.
7 Battery Low Intermittent
1-second
Battery level is low, so output
will stop soon Shut down the connected
devices to stop them.
Battery
Empty
Intermittent
2-second
Battery is dead, so output
stopped Charge the battery.
8 Battery
Deterioration Intermittent
2-second
Battery has deteriorated Replace the battery.
9 Overload Intermittent
0.5-second High connection load Reduce the connection
load.
10 UPS Failure Continuous Failure or warning has
occurred Refer to the message
displayed on the LCD.
●
Load/battery level meter
The load level meter displays the power consumption of the connected devices as a percentage.
BU2002RWL: Displayed in 10 levels, with 100% indicating 2000 VA/1400 W.
BU3002RWL: Displayed in 10 levels, with 100% indicating 3000 VA/2100 W.
BU5002RWL: Displayed in 10 levels, with 100% indicating 5000 VA/3500 W.
The battery level meter displays the remaining battery level as a percentage.