![background image](http://html.mh-extra.com/html/omron/3g3ax-mx2-mrt/3g3ax-mx2-mrt_hardware-reference-manual_742301238.webp)
Hardware reference
HARDWARE REFERENCE MANUAL
232
Revision 5.0
3.11.12 FQ-M-series Vision Sensors
fig. 125
The FQ-M Series is a series of Vision Sensors that are designed to be
integrated with high-speed positioning equipment.
The following types are supported:
(7)
(4)
(8)
(9)
(10)
(11)
(7)
(1)
(3)
(5)
(2)
(6)
Item
Type
Model
FQ-M-series
Vision Sensors
Monochrome
FQ-MS
@@@
-M-ECT
Color
FQ-MS
@@@
-ECT
Label
Terminal/LED
Description
(1)
I/O connector
An I/O Cable is used to connect the Sensor to the power
supply and external devices.
(2)
Ethernet connector
An Ethernet cable is used to connect the Sensor to external
devices such as PLCs, the Touch Finder, or computers.
(3)
Lighting connector
This connector is used to connect to external lighting (a
Strobe Controller).
(4)
EtherCAT input
connector
This connector is used to connect to EtherCAT-compatible
devices.
(5)
EtherCAT output
connector
This connector is used to connect to EtherCAT-compatible
devices.
(6)
Node address
setting switches*
These switches are used to set the node address as an
EtherCAT communications device. The setting range is 00
to 99.
(7)
Mounting holes
These mounting holes are used to mount the camera.
(8)
C-mount lens fitting
The C-mount lens is attached here. Determine the
appropriate CCTV lens (C-mount lens) to use based on the
field of view required for the size of the measurement
object.
(9)
Strobe Controller
mounting holes
The Strobe Controller is attached here. The Vision Sensor
is compatible with the FL-TCC1.