Omron 2D CODE READER, Руководство пользователя

Страница: 38 / 113

37
V400-F050/250/350
User’s Manual
Sec
tion 2
Select
ing th
e Ba
nk t
o
b
e
Us
ed Norma
lly
Section 2
Changing Reading Conditions
Selecting the Bank to be Used Normally
This section explains how to select the bank that is to be used normally.
1.
Switch to the setting mode.
Hold down the center button for more than two seconds to
activate the setting mode.
“Changing Settings” p.24
2.
Select [Bank Setting] from [Setting Menu].
The [Bank Setting]
screen will appear.
3.
From [Bank #00] to [Bank #09], select the
bank that is to be used normally.
The contents of the selected bank are displayed in the
right area of the screen.
The edit menu will be displayed.
4.
Select [Set Use Bank].
A confirmation message will be displayed.
5.
Confirm the reading condition.
Select [OK] to confirm the setting. This will bring you to
the operation menu.
If you select [Cancel], the operation menu will reappear
without reflecting the changes.
An asterisk (*) will appear at both right and left ends of the reading condition to be normally used.
6.
Save the settings.
Select [Save] from [Setting Menu] to save the changes you have made to the reading condition.
p.56
STILL/LIVE MODE TRIG
UP EXECUTE DOWN
Hold down for more
than two seconds.