Omron 2D CODE READER, Руководство пользователя

Страница: 27 / 113

26
Se
ct
io
n 1
Rea
d
ing Re
sult
s
V400-F050/250/350
User’s Manual
Section 1
Studying the V400-F
Reading Results
This section explains details of the read results.
Monitor Display
Explanation of reading results displayed on the monitor is given below.
There are four display methods: normal display, highlighting display, code quality
analysis display and communication display.
The desired display method can be set in the setting mode.
Display setting:
p.52
„ Normal Display
Normal screen
• Error code contents
„
Highlighting Display
The screen is enclosed in a frame whose color that indicates the reading status.
Error code Action
?E000 2D code cannot be found, possibly due to uneven background. Check the work piece
surface and lighting condition.
?E100 2D code cell cannot be recognized correctly. Check the marking and lighting conditions,
and then perform teaching again.
?E200
Reading was not completed within the specified period of time. Check the work piece and
lighting condition, then perform teaching again.
Increase the reading timeout value.
If reading has failed, it may be possible that the cause can be identified by checking the read image.
p.53
Reading status
The reading status is
displayed.
OK (blue) :Reading is
completed
successfully.
NG (red) : Reading has
failed.
Read data
The read data is displayed.
(Max.
208 characters =
8 lines × 26 characters)
An error code is displayed in case of
reading error.
Reading status
The reading status is
displayed.
OK (blue) :Reading is
completed
successfully.
NG (red) : Reading has failed.
Read data
The read data is displayed.
(Max.
26 characters)
An error code is displayed in
case of reading error.