System Operations
3-12 OMNTEC
®
Mfg., Inc.
This screen provides product and water height data for the tank number shown. The
top line remains unchanged showing the day, date, time, and status. The next two
lines provide the following data:
♦
Product Type – describes the product in the tank such as Hi Test, Premium,
Diesel, Regular, etc.
♦
HEIGHT – shows the levels in inches for the product and water. The
Magnetostrictive (MTG) probe in the tank has a water float that indicates the
actual height of the water. It also has a product float that indicates the height of all
liquid in the tank, not the actual height of the product. The product height is
calculated by subtracting the reading of the water float from the product float.
To view the same data for other tanks, press the arrow beneath NEXT.
Note: After all enabled tanks have been displayed, the LCD will show available
sensor data and then go back to the first screen that was displayed..
3.2.2.1.2
STATUS Submenu (Screen #2)
Selecting MORE on the bottom line of the LCD, advances the LCD to Screen #2 (see
Figure 3-11) of the STATUS Submenu.
TU 02/06/07
15:24:31
*STATUS:NORMAL
Tank 1 Product Type: DIESEL
HEIGHT Product:43.56, Water:0.54(In)
NEXT |PREV. |PRINT |MORE
Fig. 3-10: Status Submenu – Screen #1
TU 02/06/07
15:24:31
*STATUS:NORMAL
Tank 1, VOLUME Prod: 2907.10 (G)
WATER: 36.16 (G) Gross:2943.30 (G)
NEXT |PREV. |PRINT |MORE
Fig. 3-11: Status Submenu – Screen #2
