OEL8000II
Owners Manual
2-3
2.2.1.3
Warnings, Alarms, and Setpoints
The OEL8000II controller will respond to certain conditions by initiating an alarm,
warning condition, or a programmed response when the product level rises or drops
to a specific setpoint.
The controller responds to a warning condition by displaying a message on its LCD.
If the system includes a remote annunciator, its LED will flash.
In the event of an alarm, the controller will illuminate its red ALARM LED, activate
its audible alarm, and display a message on its LCD. If the system includes a remote
annunciator, its LED will illuminate and its audible alarm will also be activated.
Pressing the
ACK
key on the controller’s front panel will silence the horns, but the
LEDs will remain illuminated, and the controller’s LCD will continue to provide
alarm data until the alarm condition has been eliminated.
.
.
.
- - - Testing PROM
Prom Tests OK
- - - Testing RAM
PASSED
RAM tests OK
- - - Testing Level Probes
T# PRODUCT TYPE
TEST
T1 DIESEL
P
T2 REGULAR
P
.
.
.
T8 GAS
P
- - - Testing Leak Sensors
S# P/N LABEL
TEST
01
BXLS
T 1, Dbl_Wall#: 1
P
(S/N:
000000001)
02
BXLS
T 2, Sump#: 1
P
(S/N:
000000002)
03
BXPDS T 3, Dispenser#: 1
P
.
.
.
Figure 2-1: Sample Self-Test Printout
