Omnitronic TRM-202MK3, Руководство пользователя

Страница: 18 / 20

18
•
EN
5
5 5
5 Setup
Cable connections
The console offers numerous, highly flexible possibilities for balanced or unbalanced connection of
professional audio equipment. To avoid interfering noise, switch off the mixer or set the channel volume
control and output controls to minimum prior to connecting and disconnecting equipment. Be sure to use only
high-grade cables. The illustrations below show the wiring of these cables.
Connector Structure Balanced
connection
Unbalanced
connection
XLR, male.
red = 2
black = 3
shield = 1 red = 2
shield = 1 + 3
XLR, female
red = 2
black = 3
shield = 1 red = 2
shield = 1 + 3
6.3mm jack, stereo
red = tip
black = ring
shield = sleeve red = tip
shield =
ring
RCA
red = tip
black = sleeve
shield = n/c red = tip
shield = sleeve
Powering up
To protect your audio equipment, specifically your speakers, follow this power-up sequence: Set all output
volume controls of any equipment to minimum. Switch on your audio sources first, then the mixer. Always
switch on amplifiers last. Then turn up the volume control on your sources (if provided) and set the output
volume of the mixer to a low level. Turn up the volume controls of your amplifier(s) slowly. Make adjustments
to all volume settings as needed. For switching off, follow the inverse sequence: always switch off amplifiers
first, then the mixer and then the audio sources.