Omnitronic RS-1222, Руководство пользователя

Страница: 21 / 31

10040100_V_1_1.DOC 21/31
L/MONO R
STEREO AUX RETURN AUX SEND
1 1
2 2
TAPE IN TAPE OUT
L
R
The signal is separated, led outside and inserted at the same position after being modified.
The inserts are pre EQ, AUX and fader and are sent and received via the same jack plug.
Occupation Insert-connections:
Insert-connection via
Tip
Sleeve
Strain relief clamp
stereo 1/4" jack plug
Ring
Tip =
Output
Sleeve =
Ground / Shield
Ring =
Input
Effector-
input
Effector-
output
Tip =
Output
Sleeve =
Ground / Shield
Ring =
Input
Mixer output
stereo 1/4" jack plug
Connect the mixer‘s output signal via a split-cable with the effector’s input (tip&sleeve) and output
(ring&sleeve).
4.3 Connections
AUX SEND/RETURN
Connect your effectors or monitor system/zone system with the AUX
SEND-sockets.
AUX 1 is PRE-fader and can be used for your monitor system or zone
system. You can adjust the signal level for the AUX SEND 1-socket
via the AUX SEND 1-control.
AUX 2 is POST-fader and can be used for your effectors. You can
adjust the signal level for the AUX SEND 2-socket via the AUX
SEND 2-control.
Signal returns from the effector can be inserted via the AUX
RETURN-sockets. The signal level of the AUX RETURN-sockets can
be adjusted via the Return-controls.
TAPE IN/TAPE OUT
For recording, connect your tape recorder or cassette deck to the TAPE OUT-
sockets. The TAPE OUT level will not be influenced by the Main Mix fader. You
can set the output level with the channel faders, the tone controls and the GAIN
control.
You can insert the tape-signal via the TAPE IN-sockets. You can adjust the signal
level via the TAPE IN-control.