10006850_V_1_0
26/26
1) All screws used for installing the devices or parts of the device have to be tighly connected and must not
be corroded.
2) There must not be any deformations on housings, fixations and installation spots (ceiling, suspension,
trussing).
3) The electric power supply cables must not show any damages, material fatigue (e.g. porous cables) or
sediments. Further instructions depending on the installation spot and usage have to be adhered by a
skilled installer and any safety problems have to be removed.
Disconnect from mains before starting maintenance operation!
DANGER TO LIFE!
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no servicable parts inside the device except for the fuse. Maintenance and service operations are
only to be carried out by authorized dealers.
If the power supply cable of this device becomes damaged, it has to be replaced by a special power supply
cable available at your dealer.
Should you have further questions, please contact your dealer.
TECHNICAL SPECIFICATIONS
Power supply: 2 x
15
V AC ~
Power consumption:
35 W
Inputs:
2 phono, 12 line, 2 mic
Outputs:
2 Master, 1 Booth, 1 Rec
Minimum input voltage:
Microphone:
1 mV RMS
Phono:
3 mV RMS
Line:
150 mV RMS
Output voltage:
Master 1:
0.75 V/1.5 V RMS or XLR
Master 2:
0.75 V/1.5 V RMS
Booth:
0.75 V/1.5 V RMS
Record:
0.75 V RMS
Headphones:
8 Ohms or more
Outputs:
1 Master-Out, 1 Rec-Out, 1 Booth-Out
Master 1 Out:
via 2 additional, balanced XLR-connectors
Master 2 Out:
via 2 1/4" mono-jack connectors
Frequency range:
20 - 20 000 Hz
Distortion: <0.03
%
S/N-ratio: >75
dB
Talkover-attenuation: -15
dB
Tone control:
Treble:
10 KHz - 26 dB bis +12 dB
Middle:
1 KHz - 26 dB bis +12 dB
Bass:
100 Hz - 26 dB bis +12 dB
MIC Tone control:
Treble:
10 KHz - 12 dB bis +12 dB
Middle:
1 KHz - 12 dB bis +12 dB
Bass:
100 Hz - 12 dB bis +12 dB
Dimensions (WxDxH): 3
2
0 x 320 x 110 mm
Weight: 3
kg
Please note: Every information is subject to change without prior notice. 23.12.2005 ©