10006850_V_1_0
24/2
6
Rear panel
1. POWER SWITCH
Press this button to start operating.
2. MASTER 1 OUT
Output sockets (RCA and XLR) for connecting your power amplifier.
3. OUTPUT LEVEL-SELECTOR
Used to switch the output level to 0.75V or 1.5V
.
4. BOOTH
Connect your monitor system here via RCA.
5. REC OUT
Connect your recording unit here via RCA plugs.
6. LINE IN-SOCKETS
Input sockets (RCA) for connecting your line sources like CD, MP3, MD, DAT, Tape Decks, Rhythm
Machines or Samplers.
7. MAIN LINE / PHONO INPUT-SOCKETS
Input sockets (RCA) for connecting your line sources like CD, MP3, MD, DAT, Tape Decks, Rhythm
Machines, Samplers or your turntables equipped with MM pickup cartridge or for line sources. Set the
PH/LINE switch accordingly.
8. PH/LINE-SELECTOR
Used to switch the input sockets of CH-1 and CH-2 to Phono or Line.
9. GND (Ground terminal)
Connect the ground lead of the turntable with this terminal. This helps to reduce humming and pop noises.
10. MIC 1 INPUT-SOCKET
Connect your microphones with the ¼" jack socket. Make sure that the LINE/MIC-switch is set to MIC.
11. MIC 2 INPUT-SOCKET
Connect your microphones with the ¼" jack socket. Make sure that the LINE/MIC-switch is set to MIC.
12. MIC/LINE-SELECTOR
Used to switch the input sockets of CH-3 and CH-4 to MIC or Line.
13. X-START-SOCKETS
Via the Start-socket, the respective CD-player can be remotely controlled via the Crossfader.