19
•
EN
No.
Element
Function
1
Audioplayer
MP3 player with built-in Bluetooth receiver and 6 operating buttons.
[MODE]: Short actuation: for switching between USB, SD and Bluetooth
operation. / Long actuation: for switching the player on/off.
[►
II
]: For switching between play and pause.
[ ]: Stops the playback.
[
]: For selecting random play and repeat functions.
[
] and [
]: For title selection (short actuation) and fast forward/reverse
(long actuation).
2
Memory card slot
For inserting an SD(HC) card.
3
USB port
For connecting a USB storage device.
4
Infrared sensor for the
remote control
When actuating a button, always direct the remote control towards the
sensor. There must be no obstacles between remote control and the
sensor.
5
Remote control
[ ]:
For switching the audio player on/off.
[STOP]: Stops the playback.
[
]:
For muting the audio player.
[MODE]: For switching between USB, SD and Bluetooth operation.
[ ]: For selecting random play and repeat functions.
[EQ]: For selecting equalizer settings.
[
] and [
]: For title selection.
[ ] and [ ]: For basic volume adjustment of the audio player.
[
0-9
]: Numerical keys for direct selection of a title.
6
Level control
To mix the microphone signals of the inputs MIC 1 and MIC 2 to the
master signal.
7
Level control
To mix the line signal to the master signal.
8
Intensity control
Adjusts the intensity of the internal reverb effect applied to inputs MIC 1
and MIC 2 and the wireless microphones.
9
Level control
To mix the audio player signal to the master signal.
10
Master control
Adjusts the overall volume.
11
Clip indicator
Lights if the internal power amplifier section is overloaded. Reduce the
volume of the signal sources accordingly.
12
Power indicator
Lights when the PA system is powered on.
13
Microphone inputs
6.3 mm jacks for connecting microphones.
14
Line input
Stereo input (RCA L/R) for connecting audio units with line level (e.g. CD
player).
15
Line output
RCA jacks to feed the mixed signal (mono) to units with line level inputs,
e.g. another PA system.
16
Tone control
Graphical 5-band equalizer for the master signal.
17
Level controls
To mix the wireless microphone signals to the master signal. The LEDs
light when a radio signal is received.
18
On/off switch
Switches the receiver module on (POWER indicator lights) and off.
19
12V EXT. POWER
INPUT terminals
For alternative power supply from a 12 V source.
20
Battery indicators
Indicate the status for the rechargeable battery. If only the red indicator
lights up, the battery should be charged.
21
Antenna inputs
BNC jacks for connecting the receiving antennas.
22
Fuse holder
For the external power source and the rech. battery. Only replace the
fuse when the device is disconnected from mains. Only use fuses of the
same rating and power. The correct fuse value is specified on the rear
panel.
23
Power switch
Switches the PA system on and off.
