13
Power Cord
Always plug in the power plug least. The power plug must always be inserted without force. Make sure that
the plug is tightly connected with the outlet. Never let the power cord come into contact with other cables!
Handle the power cord and all connections with the mains with particular caution! Never touch them with wet
hands, as this could lead to mortal electrical shock. Never modify, bend, strain mechanically, put pressure
on, pull or heat up the power cord. Never operate next to sources of heat or cold. Disregard can lead to
power cord damages, fire or mortal electrical shock. The cable insert or the female part in the device must
never be strained. There must always be sufficient cable to the device. Otherwise, the cable may be
damaged which may lead to mortal damage. Make sure that the power cord is never crimped or damaged by
sharp edges. Check the device and the power cord from time to time. If extension cords are used, make sure
that the core diameter is sufficient for the required power consumption of the device. All warnings concerning
the power cords are also valid for possible extension cords.
Always disconnect from the mains, when the device is not in use or before cleaning it. Only handle the power
cord by the plug. Never pull out the plug by tugging the power cord. Otherwise, the cable or plug can be
damaged leading to mortal electrical shock. If the power plug or the power switch is not accessible, the
device must be disconnected via the mains.
If the power plug or the device is dusty, the device must be taken out of operation, disconnected and then be
cleaned with a dry cloth. Dust can reduce the insulation which may lead to mortal electrical shock. More
severe dirt in and at the device should only be removed by a specialist.
Liquids
There must never enter any liquid into power outlets, extension cords or any holes in the housing of the
device. If you suppose that also a minimal amount of liquid may have entered the device, it must immediately
be disconnected. This is also valid, if the device was exposed to high humidity. Also if the device is still
running, the device must be checked by a specialist if the liquid has reduced any insulation. Reduced
insulation can cause mortal electrical shock.
Foreign Objects
There must never be any objects entering into the device. This is especially valid for metal parts. If any metal
parts like staples or coarse metal chips enter into the device, the device must be taken out of operation and
disconnected immediately. Malfunction or short-circuits caused by metal parts may cause mortal injuries.
Prior to Switching on
Before the unit is switched on all faders and volume controls have to be set to zero or minimum position.
Children and Amateurs
Keep away children and amateurs!
Maintenance and Service
There are no serviceable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers!
Содержание EM-260
Страница 1: ......
