27
27. 8/12/16 %-BUTTON
With this button, you can select the speed-adjusting range b/- 8 % (LED green), +/- 12 % (LED
yellow) or +/- 16 % (LED red). Please refer to 6.6 Adjusting the playback-speed.
28. PITCH BEND-BUTTONS
With the Pitch Bend-buttons, you can adjust the playback-speed temporarily by +/- 16 %. Please refer to 6.6
Adjusting the playback-speed.
If you press and hold the Pitch Bend - button, the playback speed decreases down to 0. This effect is
comparable with the Motor Off-effect.
29. PITCHFADER
You can adjust the desired speed with the Pitchfader. The display shows the current percentage.
30. CD SLOT IN
Insert the disc here. If a CD is inserted and the CD-player is ready for operation, the CD LED is shining.
Please refer to the explanations under 6.2 CD Slot In.
4.3 Rearpanel
31. AUDIO OUT-SOCKETS
The music-signal of these sockets is analogue. Connect the output to the respective input of your mixer.
32. FADERSTART-SOCKET
Via the Faderstart-socket, the CD-player can be remotely controlled. If you are using a mixer with Faderstart-
function connect the player with the Control Out-socket. Please note that these sockets must never be
connected with any voltage. Please refer to the explanations under 6.12 Faderstart.
33. DIGITAL OUT-SOCKET
The music-signal of this socket is digital. Connect the output to the respective input of a digital amplifier for
example.
34. HEADPHONES SOCKET
With this socket, you can connect headphones with an impedance between 8 Ohms and 600 Ohms.
35. VOLUME-CONTROL
With the Volume-control, you can adjust the headphones volume.
36. VOLTAGE SELECTOR
Make sure that the indication corresponds to the available voltage.
37. AC CONNECTION
Plug the power supply cable in here.
38. POWER SWITCH
Press this button to start operation.
L
R
VOLUME
31
32
33
34
35
36
37
38
