24
3
OPERATING ELEMENTS & CONNECTIONS
Mixer Section
1
Power Indicator
Lights when the unit is switched on.
2
INPUT 1 THRU Indicator
Lights when the INPUT 1 THRU function is enabled, i.e. INPUT 1 is directly routed to the master
outputs instead of the built-in sound card. Use the rear PC/THRU selector switch to enable this
function. When INPUT 1 is overloaded (level over 2 V) the PEAK indicator will light. If the LED
lights continuously, turn back the rear INPUT 1 GAIN control accordingly.
3
Microphone Indicator
Lights when the INPUT 2 selector switch is set to MIC.
4
INPUT 1 Selector Switch
Switches the built-in sound card or the master output between the input sources AUX and
LINE/PHONO 1.
5
INPUT 2 Selector Switch
Selects input source LINE/PHONO 2 for the built-in soundcard; position MIC has no function.
6
MASTER Control
Controls the overall volume of the unit.
Note: Prior to switching on, turn the master control to minimum to avoid a possible switching-on
noise.
Front Panel
7
MIC Input
6.3 mm jack for connecting a DJ microphone.
8
MIC LEVEL Control
Level control for the DJ microphone.
9
On/Off Switch
Switches the DJ microphone on and off.
10
Sensitivity Controls
Adjust the sensitivity of the touch-sensitive jog wheels.
