Omnitronic CMX-2000, Руководство пользователя

Страница: 38 / 64

38
•
DVS: The DVS mode (Digital Vinyl System) enables transmission of audio signals in both
directions between the CMX-2000 and the computer. Thus, you will receive the audio signal of the
DJ software coming from the computer and simultaneously route the signals of inputs LH/PH
through the built-in sound card into the computer. Use the DVS mode for Timecode applications
and for routing external audio devices as additional line inputs through the DJ software.
6 GAIN Controls
For adjusting the input amplification of each input channel.
7 HIGH Controls
For adjusting the high frequencies of each input channel from -
∞
dB to +9 dB.
8 MIDI Indicator
Lights when the mixer section is set to MIDI mode in order to control the mixer section of the DJ
software.
9 MID Controls
For adjusting the mid frequencies of each input channel from -
∞
dB to +9 dB.
10 LOW Controls
For adjusting the low frequencies of each input channel from -
∞
dB to +9 dB.
11 FILTER Controls
For adjusting the notch filter effect of each input channel.
•
Left position LPF: high frequencies are attenuated (low-pass filter).
•
Right position HPF: low frequencies are attenuated (high-pass filter).
12 CUE Buttons
For monitoring each input channel via headphones ahead of the channel faders.
13 Channel Faders
For adjusting the volume level of each input level.
14 FADER START Buttons
CD players with contact control can be remote controlled with the crossfader of the CMX-2000
(fader start function). These buttons switch the fader start function on and off. With the function
switched on the corresponding CD player is set to play mode by advancing the crossfader; by
closing the crossfader the CD player returns to the last set cue point and changes into pause mode.
15 MIC/AUX 1/AUX 2 Input Selectors
Assigns input source MIC, AUX 1 or AUX 2 to the LEVEL and TONE controls.
16 LEVEL Control
Level control for the input source MIC, AUX 1 or AUX 2.
17 TONE Control
Adjusts the sound for the input source MIC, AUX 1 or AUX 2.
18 Microphone Selector with Indicator
• Position OFF: microphone is switched off.
• Position ON (LED lights): microphone is switched on.
• Position TALKOVER (LED flashes): automatic level attenuation (20 dB) of all input channels in
case of microphone announcements.
19 Master Level Meter
7-digit LED meter of the stereo master signal.
20 Channel Level Meter
7-digit LED meter for input channel 1 and 2 after the gain and EQ controls.
21 REVERSE Indicator
Lights when the channel 1 fader (CH-1), channel 2 fader (CH-2) or the crossfader (XF) are reversed.
22 Crossfader
For crossfading between for input channel 1 and 2. In mid-position both channels can be heard at
the same volume.